To configure your Netgear wireless range extender to the current wireless network, go to the login tab marked “New Extender Setup.” The user must go to to configure their Netgear range extender, where they will find a login tab for New Extender Configuration to install their wireless range extender. They will then have the opportunity to install their wireless extender and register for a Netgear account. When installing a wireless range extender, users occasionally have trouble accessing the setup page for the new extender. The most frequent issues encountered when installing a range extender are listed below.

Most usual mistakes while setting up a new extender:-

  • The Netgear range extender does not have power.
  • The wireless extender is placed far from the router.
  • An unstable modem- or router-to-modem link
  • You are not currently connected to your WiFi network.


1. Connect the Power of the Netgear Extender

Connect the power outlet to the range extender. Your main modem or router should be in the same room as the extender. Once the installation is complete, you can move the wireless extender to any location that is within the wireless network range of your primary modem or router.

2. Factory Reset the Extender for Netgear Extender Configuration

If you bought a brand-new extender, go to step 3. 

You must perform a factory reset if you purchased a used range extender. Press the factory reset pinhole on the range extender’s side for 15 seconds. The power light will change to an amber light to show that your device is rebooting. 

Your range extender will display one firm power green light once the factory reset has been accomplished. 

The Netgear extender will only have one reliable power green light following a factory reset. It means your extender has been reset to its factory settings. 

Setup of a Netgear extender. Before setting up, plug the Wi-Fi range extender into a power outlet.

  1. To install the extender, visit the Mywifiext New Extender Setup website. 

Scan for the wireless network “NETGEAR EXT” after logging into your wireless computer or mobile device. When you connect your device to the “NETGEAR_EXT” network, the installation page will instantly show on that device. 

The Netgear Genie Setup page automatically appears after a connection, as seen in the example below. 

NOTE: If after a brief period of connection, this setup page does not appear, open a web browser and go to the website

  1. Select “New Extender Setup” from the menu

It displays the login screen for brand-new accounts, as shown below.

  1. Create Account Details

The Netgear extender setup wizard prompts you for your email address, new password, new password confirmation, and two security questions. Select a security question from a list and then type the appropriate response. Fill out this form appropriately.

Do you want to Grow your Business:

Check out our Top Services:

  1. Social Media Marketing
  2. Influencer Media Marketing
  3. SEO Marketing

6. Tap the Next Button

It opens a screen where you can choose whether to set up your Netgear extender as a wireless access point or a wireless range extender.

  1. Select Wi-Fi Range Extender from the menu

Simply press the WiFi range extender button. The Netgear range extender is looking for qualified wireless connections to repeat and boost on both the 2.4 and 5 GHz network connections. 

The “Choose the wireless network you’d like to extend” page, as shown in the following step, is displayed by the Netgear new extender setup wizard, within one or two minutes. 

List of wireless networks that are accessible at the time of the scan.

  1. Connect to your wireless network

Look at the final image. See the radio buttons of the range extender discovered to the left of each wireless network name. 

In this Netgear extender setup example, the wireless extender discovered Wi-Fi networks in the 2.4GHz and 5GHz bands. So, depending on which network you wish to strengthen, check either the 2.4GHz network or both. Suppose you want to go further, not a 5GHz wireless network, but a 2.4GHz network. The 2.4 GHz network checkbox is then selected, while the 5 GHz network band is unchecked. Alternatively, check the opposite if you want to extend a 5 GHz network but not a 2.4 GHz one. Tick both boxes if you want to extend both 2.4 and 5 GHz networks.

  1. Press the Next key

The following screen asks you to enter the 2.4 GHz and 5 GHz wireless network passcode. 

New extender setup from Netgear. Wi-Fi network passwords prompt screen for Netgear Genie setup, with password fields, highlighted.

  1. Enter the network security password

The wireless security key or password for the 2.4 GHz wireless network you want to extend must then be entered. Next, input the network’s 5 GHz wireless password. 

Note:-Please double-check your wireless security key before using it. as you type the wifi password.

  1. Press the Next key

After completing the extender configuration, the wireless extender will attempt to connect to the selected Wi-Fi network(s). 

The Netgear extender configuration successfully connects to the modem or router wireless networks being extended after applying the extender and primary router’s settings. The setup of the new Netgear extender is almost complete.

  1. Search for Wireless Networks 

On your wireless PC or mobile device, select the wireless network option. After that, join the EXT network. 

  1. By pressing the Continue button 

Following device pairing with the Netgear extension. Select “Continue” 

Leave a Reply

Want to Grow Business

Get Free Reward from One-Click Grow.

Facebook Youtube Instagram